Precautions for the installation of the vacuum blower

1. It is necessary to use flat washers and spring washers to tighten the screws;

2. It is best to use rubber buffer to bear the weight of the vortex fan, especially the high-power vortex fan, which is essential;

3. For some occasions that require noise, a muffler can be installed to reduce noise (under normal circumstances, about 5dB), and the muffler is installed at the end of the air inlet pipe or outlet pipe;

4. For some occasions with high noise requirements, a layer of silencing foam can be added according to the conditions of the machine itself to meet the noise requirements of the site.

5. When using silencing foam, pay attention to the distance between the vortex fan and the box, pay attention to the ventilation and heat dissipation of the vortex fan, and pay attention to the use of rubber buffer glue to bear the weight of the vortex fan.

6. The pipe connection of the inlet and outlet of the vortex fan should be connected by a hose to isolate the vibration.